Fuse Keeps Blowing Granville
Emergency Response in Granville
Licensed electrician dispatched fast · 24/7 · 30–60 min
Western Sydney homes — post-war brick veneers across Bankstown and Liverpool, Federation cottages through Parramatta and Auburn, modern estate builds from Penrith to Pennant Hills — span a 70-year vintage range with switchboard ages and conditions to match.
- The original fault that caused it
- Replacing fuse wire with the wrong gauge (oversized) which removes protection
- Aged fuse holders cracking, arcing, or scorching while still in service
- Combustible material inside the meter box catching from a hot fuse holder
- The lack of RCD protection across the rest of the installation
- A burning, plastic, or "hot wire" smell at the meter box
- Browning, scorching, or cracking around fuse holders
- Visible blackening or arc damage on ceramic posts
- Repeated blows on the same circuit within days
- Lights dimming when the fault occurs
- Hot fuse holder body to touch
About Why Does My Fuse Keep Blowing?
Ceramic and rewireable fuses blow repeatedly when aged wiring insulation deteriorates, circuits are undersized for modern appliance loads, or a failing appliance is drawing sustained fault current. That repeated blowing signals conductors overheating inside walls — a genuine fire risk — so call 0433 462 902 now or book a switchboard assessment online.
Sydney Electrical Service attends homes with original 1970s and 1980s fuse boards every week, most often in Inner West terraces, North Shore weatherboards, North Western Sydney brick veneers, and unrenovated strata blocks. A board that cannot hold a fuse needs full replacement with modern circuit breakers and an RCD-protected switchboard — not just a new fuse wire.
What to Do Right Now in Granville
- Switch off the main switch before opening the meter box. Never replace fuse wire with the supply live.
- Identify which fuse has blown. Look for melted or broken fuse wire between the ceramic posts.
- Identify what was running on that circuit when it blew — note appliances and lights affected.
- Unplug every appliance on that circuit before replacing the wire.
- Replace fuse wire only with the correct gauge stamped on the holder (8 A, 15 A, 20 A). Never use a heavier wire to "stop it blowing."
- Restore power and reintroduce appliances one at a time. The one that re-blows is your fault.
- If the fuse blows again with everything unplugged, the problem is in the fixed wiring. Leave the fuse out and call us.
- Strongly consider booking a switchboard upgrade — modern boards are dramatically safer, faster to reset, and required for new appliance installations like ducted air conditioning, EV chargers, or electric hot water systems.
Electrical work in Granville
EV charger installations across Western Sydney typically require switchboard or main-switch uplift before the charger can be safely commissioned — particularly in the older inner Western Sydney suburbs with pre-2000 switchboards.
Common Questions
Can I replace fuse wire myself?
Should I upgrade my fuse board to a modern switchboard?
How much does a switchboard upgrade cost in Sydney?
Why does the fuse blow when I use the heater?
Why Granville Residents Choose Us
Our Western Sydney vans carry parts appropriate to the region's vintage range — from 1990s breakers and RCDs for Federation conversions, through to modern RCBOs for full retrofits, plus the marine-grade hardware for the salt-affected southern Western Sydney pockets near the river.
Also serving nearby
Electricians across Western Sydney
Granville is part of the wider Western Sydney area our team covers. See our electricians across Western Sydney →
24/7 Emergency Electrician — Granville
Licensed, local & dispatched fast. Serving Granville 2142 and surrounding suburbs.