My solar isn't working. Is that an emergency?

If the rest of the home has power and the solar is just inactive, no — book us for a non-urgent inspection. If the solar is faulted in a way that prevents the main switch resetting, yes.

The point of attachment is loose. Whose responsibility is it?

The point of attachment hardware (bracket and insulator on your home) is the property owner's responsibility. The service main itself is Ausgrid's. Repairs and replacement are licensed Level 2 ASP work — we handle this routinely.

What about my food in the freezer?

A typical full freezer holds ~24 hours; a half-empty one ~12 hours. Don't open it. After 24+ hours of outage, perishables should be assessed individually. Keep receipts for any spoiled food — your contents insurance may cover it.

How quickly can you respond after a major storm?

During peak storm response we are running 2–4 hour ETAs across Sydney. We prioritise active fire risk, fallen lines, wet switchboards, medical-dependence customers, and elderly residents. Call 0433 462 902 as early as possible to lock in your slot.

Is it safe to reset my RCD myself after a storm?

Yes — if the switchboard area is dry, there are no burning smells, and there are no visible scorch marks, you can press the RCD back to ON yourself. If it trips again immediately or won't reset at all, there is an active fault on that circuit and it must stay off until a licensed electrician has inspected it.

Will my house catch fire if water got into my meter box?

It can — water inside a meter box causes arcing and short circuits that can ignite surrounding materials, sometimes hours after the storm as moisture tracks through wiring. Leave the meter box closed, do not open or touch it, and book an emergency inspection. Call Sydney Electrical Service on 0433 462 902 if you see corrosion, scorch marks, or smell burning near the box.

How much does it cost to repair a storm-damaged switchboard in Sydney?

Cost varies widely depending on what is damaged — a single blown service fuse is a quick fix, while a water-logged switchboard may need full replacement including new RCDs and circuit breakers. We provide fixed-price quotes before any work begins, so you know exactly what you are up for.

Who should I call first after a storm — an electrician or Ausgrid?

Call Ausgrid (13 13 88) first if the entire street is dark, a power line is down near your property, or your service fuse has blown — those faults are on their network and they must attend first. If your neighbours have power but you do not, the fault is on your side of the meter and an electrician is the right first call.

Do I really need an electrician to check things if the power came back on and everything seems fine?

If circuits tripped during the storm, breakers feel warm to the touch, any outlets spark when you plug something in, or lights flicker on otherwise working circuits, book a post-storm inspection — storm surges can leave heat damage inside wiring that only shows up days later. If nothing tripped and everything behaves normally, you are likely okay, but any doubt is worth a quick check.

No Power After Storm Castlecrag

Emergency Response in Castlecrag

Licensed electrician dispatched fast · 24/7 · 30–60 min

0433 462 902 Book Online

24/7 Emergency Response Licensed & Insured 30–60 Min Arrival Upfront Pricing

Properties across Lindfield, Killara, Gordon, and Pymble typically combine large-block heritage homes with extensive 2010s renovation overlays — bulk downlight installations, ducted AC, wine cellars, pool/spa systems, and home automation — all on switchboards rebuilt during the renovation but rarely upgraded since.

On the leafy North Shore, falling branches and overhead service lines are a common cause of post-storm outages on the larger blocks, while the strata towers around Chatswood may lose power to common-area boards. With heavy EV, data and automation loads, check whether it's your switchboard or the whole building before calling the network.

Full guide: No Power After Storm in Sydney – What to Check — causes, FAQs & expert advice

About No Power After Storm in Sydney – What to Check

Fallen network lines, a tripped RCD, a blown service fuse, or storm-damaged switchboard wiring are the most common causes of power loss after a Sydney storm. If you smell burning, see scorch marks, or find a damaged meter box, the hazard is live — book a 24/7 emergency inspection or call Sydney Electrical Service on 0433 462 902 immediately.

Sydney’s storm season — east-coast lows, summer thunderstorms, and southerly busters — can dump 80 mm of rain and 100 km/h winds in under an hour, leaving thousands of homes across every metropolitan suburb without power. This page is the action checklist: what to look at, in sequence, so you can isolate the fault fast and turn a multi-day outage into a same-day fix.

Electrical work in Castlecrag

Castlecrag is unlike anywhere else on the North Shore, the garden suburb Walter Burley Griffin laid out into the bushland above Middle Harbour. Its housing is a distinctive blend of original Griffin-influenced stone-and-render homes, mid-century architect builds and substantial modern rebuilds, almost all on sloping, heavily treed blocks. Larger contemporary homes here often run serious electrical loads, so three-phase supply, generous switchboards and properly sized consumer mains are common needs rather than the exception, and we handle those Level 2 network connections under Ausgrid.

The bushland setting brings its own considerations, from underground supply on many streets to careful cable routing around mature trees and rock. Older homes that have been added to over the years can hide undersized boards and ageing circuits that no longer match the house. We upgrade switchboards, install RCDs and surge protection, and bring point-of-attachment and metering up to standard without disturbing the suburb's bushland character.

Common Questions

The whole street is out — should I still call you?

Not yet. Confirm via the Ausgrid (13 13 88) or Endeavour Energy outage map first. We can't help until the network is restored. Once neighbours have power and your home is still out, call us.

The power came back on but my main switch keeps tripping. Why?

Storm damage often leaves residual moisture or surge effects that don't show until power returns. A tripping main switch indicates a downstream fault — water in an outdoor circuit, surge damage to an appliance, or compromised wiring.

Should I dry the switchboard with a hairdryer?

No. Never work inside an energised or potentially energised switchboard. A wet board must be professionally isolated, dried, tested, and re-certified before being put back into service.

Can I just leave outdoor circuits off until summer ends?

You can — but the underlying fault doesn't fix itself, and the damage typically worsens as water sits. We recommend a Level 2 inspection within 7 days of any storm-related outdoor circuit fault.

Why Castlecrag Residents Choose Us

North Shore response times depend on suburb — typical 30–60 minutes from Mosman to Crows Nest, 45–90 minutes for Lindfield to Hornsby, with longer response during major storm events when Ausgrid coordination is required.