Can I just add an RCD to my existing board instead of replacing it?

Sometimes — but if the board is at end of life, partial upgrades are often false economy. We assess whether retrofit RCDs make sense or whether full replacement is the right call.

Do you handle strata switchboards?

Yes. We coordinate with the strata committee, body corporate, building manager, and individual lot owners. Notice of Service Work, by-law compliance documentation, and access scheduling are all included.

How quickly can you respond?

Quote inspections are typically scheduled within 2–5 business days. Emergency switchboard work (fire damage, severe overheating, loss of supply) gets 30–90 minute 24/7 emergency response. Call 0433 462 902.

Switchboard Upgrade Marrickville

Local Switchboard Upgrade Electrician Sydney in Marrickville

30–60 min response · Licensed Level 2 ASP · 24/7

0433 462 902 Book Online

Licensed & Insured Level 2 ASP Authorised 30–60 Min Response 24/7 Available Fixed Price Quotes

How it works

Inner West homes — Federation terraces, post-war workers' cottages, and converted warehouses — share a building stock heritage where many switchboards predate not just RCDs but circuit breakers entirely. The result is electrical systems carrying modern household loads through 50-year-old infrastructure.

Inner West terraces and warehouse conversions often hide a switchboard that was never meant to carry today's loads, sat on top of ageing rubber and two-wire wiring. We upgrade the board, fit safety switches on every circuit and flag any heritage wiring that needs addressing at the same time.

About Switchboard Upgrade Electrician Sydney

A switchboard upgrade is one of the most consequential pieces of electrical work most Sydney homeowners will ever pay for. Done well, it gives you another 25 years of safe, code-compliant electrical service, full RCD shock protection on every circuit, and the headroom to add modern loads — induction cooktops, ducted air conditioning, electric hot water, EV chargers — without rewiring the whole house. Done poorly or deferred too long, your switchboard becomes the single largest fire and electrocution risk in your home.

Sydney Electrical Service is a fully licensed Level 2 ASP electrical contractor specialising in residential and strata switchboard upgrades across every Sydney metropolitan suburb. We handle the consumer mains, point of attachment, and metering side of the upgrade in-house — work most general electricians have to subcontract or coordinate separately with Ausgrid. Call 0433 462 902 for a written fixed-price quote, or book a site inspection online.

—

Full service details, pricing & FAQs →

Electrical work in Marrickville

Marrickville is one of the Inner West's older suburbs, and it shows in the wiring. A lot of the housing stock is late-Victorian and Federation workers' cottages and terraces, interwar California bungalows, and Art Deco brick walk-up flats, with a good share of post-war fibro and the old red-brick warehouses now converted to apartments and studios. Homes that haven't been touched since their last big reno often still run rubber or early TPS cabling, two-wire circuits with no earth, and small fuse boards that were never built to carry today's kitchens, ducted air and EV chargers. The common jobs here are full rewires, swapping ceramic fuses for a proper switchboard with RCD safety switches, and sorting tired consumer mains.

Because Marrickville sits in the Ausgrid network, anything touching the service line, point of attachment, metering or consumer mains is Level 2 ASP work, which is what we're licensed and accredited for. We handle overhead-to-underground conversions, point-of-attachment repairs after storms, new and upgraded connections, and three-phase upgrades for renovated and knock-down-rebuild homes. In the converted-warehouse and walk-up flats, strata switchboard upgrades and metering work are regular requests. We sort the network side and the home side together so it's signed off correctly the first time.

Frequently Asked Questions

How long does a switchboard upgrade take?

A standard residential upgrade is usually completed in one day, with a 2–4 hour power-off window. Complex multi-circuit, strata, or boards requiring consumer-mains replacement can take two days.

Will I be without power for long?

Typically 2–4 hours during the actual changeover. If overnight isolation is needed, we coordinate so you have power restored by evening.

Do I need to replace my fuse board?

If it has ceramic fuses, no RCD protection, or is showing signs of overheating — yes. AS/NZS 3000:2018 requires RCD protection on all final subcircuits in new and significantly altered installations.

Will my insurance cover the upgrade?

Insurance generally does not cover voluntary upgrades. It can cover repair or replacement following damage (storm, surge, fire) — we provide insurance-grade documentation for these cases.

Does a switchboard upgrade increase my home's value?

Yes — particularly for properties going to market in older Sydney suburbs. Modern compliant switchboards remove a common pre-purchase inspection issue and signal recent electrical maintenance.

Why Marrickville Customers Choose Us

We are accredited Level 2 ASP contractors on Ausgrid's Inner West grid, which means we can complete consumer-mains, point-of-attachment, and service-fuse work in a single visit — no waiting for separate Ausgrid attendance.