EV Charging Station Toongabbie

Local EV Charging Station Installation Sydney in Toongabbie

30–60 min response · Licensed Level 2 ASP · 24/7

Licensed & InsuredLevel 2 ASP Authorised30–60 Min Response24/7 AvailableFixed Price Quotes

Newer Western Sydney estates — across Pennant Hills, Carlingford, Eastwood, Epping — are mostly post-2000 with better baseline switchboard protection, but the high concentration of 2010s renovations has accumulated downlight-driver failures, retrofit AC capacity issues, and EV-charger uplifts.

About EV Charging Station Installation Sydney

Charging an electric vehicle from a standard 10 A power point works, but at roughly 1.8 kW it adds about 10 km of range per hour — fine for a short commute, painful for anything else. A dedicated 7 kW single-phase wallbox roughly quadruples that. A 22 kW three-phase unit (where supply allows) takes you to nearly 100 km of range per hour. The right charger for your home depends on your vehicle, your driving pattern, and what your switchboard and consumer mains can support.

Sydney Electrical Service installs EV charging stations across every metropolitan suburb. We're a licensed Level 2 ASP, which means we handle the supply-side, switchboard capacity assessment, and grid-connection coordination in-house — saving the multi-trade coordination most homeowners hit when retrofitting a charger into a home that wasn't designed for it. Call 0433 462 902 for a fixed-price quote, or book online.

---

Full service details, pricing & FAQs →

Electrical work in Toongabbie

Newer estate downlight failures across Pennant Hills, Eastwood, and Epping are reaching driver end-of-life simultaneously — we run "audit and replace" projects across whole homes through these suburbs.

Frequently Asked Questions

Do I need a 22 kW charger or is 7 kW enough?

For most residential users charging overnight, 7 kW is more than enough — 8 hours of overnight charging adds ~330 km of range. 22 kW makes sense for two-EV households, fleet vehicles, or homes with very short charging windows.

Can I just charge from a normal power point?

Yes — at 1.8 kW for around 10 km of range per hour. Fine if your daily commute is short. Slow if you regularly do longer trips. There are also safety considerations for sustained 10 A loads on aged outlets.

Do I need three-phase supply?

For 11 kW or 22 kW chargers, yes. Most older Sydney homes are single-phase. Three-phase upgrade is possible but typically expensive — it's usually more economical to install a 7 kW single-phase charger unless three-phase is already present.

Will my switchboard support an EV charger?

We do a maximum-demand calculation as part of the quote. Most modern switchboards have headroom; many older boards (pre-2000) need upgrade or capacity uplift before a charger can be safely added.

Do I need network approval?

For most 7 kW single-phase residential installs, simple notification is sufficient. For 22 kW, three-phase, and strata installs, formal network approval is required and we lodge it for you.

Why Toongabbie Customers Choose Us

Pre-1995 ceramic-fuse boards and 1960s–70s aluminium-busbar boards are over-represented in our Western Sydney emergency callouts. Switchboard upgrades from these legacy installations to modern per-circuit RCBO protection are routine single-day jobs.

Also serving nearby

WentworthvillePendle HillSeven HillsGirraweenWestmead

Electricians across Western Sydney

Toongabbie is part of the wider Western Sydney area our team covers. See our electricians across Western Sydney →

Book EV Charging Station Installation Sydney in Toongabbie

Licensed, local & dispatched fast. Serving Toongabbie 2146 and surrounding suburbs.

0433 462 902 Book Online — 60 Seconds