How many downlights do I need per room?

Depends on room size, ceiling height, beam angle, and use. As a rough starting point: 1 downlight per 1.5–2 m² of room area for general lighting. We design rooms individually based on what they're for.

Do you remove old fittings as part of the install?

Yes — old fittings, drivers, and any redundant cabling are removed. Plasterboard repairs (small holes) are included; larger ceiling repairs may require a plasterer.

How quickly can you install?

Standard downlight projects are typically scheduled within 5–10 business days. Larger renovation lighting plans coordinate with the build schedule. Call 0433 462 902.

Downlight Installation Burwood

Local Downlight Installation Electrician Sydney in Burwood

30–60 min response · Licensed Level 2 ASP · 24/7

0433 462 902 Book Online

Licensed & Insured Level 2 ASP Authorised 30–60 Min Response 24/7 Available Fixed Price Quotes

The Inner West has some of Sydney's most heavily renovated residential building stock combined with some of its oldest core wiring. Federation conversions, Art Deco apartment blocks, and 1980s townhouse infill across Marrickville, Stanmore, and Dulwich Hill all share characteristic patterns.

Inner West terraces and warehouse conversions often hide old rubber or two-wire wiring above the ceiling, so before we cut a single hole for downlights we check what the existing circuit can safely carry and upgrade the wiring where the heritage fabric demands it.

About Downlight Installation Electrician Sydney

A well-lit Sydney home runs on dozens of downlights — but a poorly chosen, badly installed, or end-of-life downlight installation costs you in three ways: it burns more energy than it should, it fails sooner than it should, and in the worst case it traps heat under ceiling insulation and becomes a fire risk. Modern fixed LED downlights with integral drivers and IC-F rating are dramatically safer and longer-lasting than the legacy 12 V halogen and early LED retrofits installed across Sydney homes during the 2000s and 2010s.

Sydney Electrical Service plans, installs, and replaces downlights across every Sydney metropolitan suburb. We design lighting plans that account for room function, ceiling cavity ventilation, insulation contact ratings, and dimmer compatibility — not just “how many can fit on the ceiling.” Call 0433 462 902 for a fixed-price quote, or book online.

—

Full service details, pricing & FAQs →

Electrical work in Burwood

Burwood has two distinct sides electrically. Around the leafy streets you've got grand Victorian and Federation homes, many heritage-listed, on big blocks; around the town centre and station it's increasingly high-rise, with dense residential towers and mixed-use strata stacked above the retail strip. Each end brings different work, period homes hide ageing wiring and undersized boards, while the towers run large three-phase main switchboards, distribution boards on every level and metering rooms feeding dozens of units.

As an Ausgrid-accredited Level 2 electrician we work across both. For the older homes that's rewires, RCD-protected switchboard upgrades and consumer mains renewals; for strata and commercial buildings it's common-property boards, house-light and lift supplies, and the high-capacity network connection back to Ausgrid. We're set up to coordinate with building managers and owners' corporations so the larger jobs are staged safely with minimal disruption to residents and tenants.

Frequently Asked Questions

Should I replace all my old halogens with LEDs?

Yes — energy savings of 75–85%, longer service life, and (with IC-F rated fittings) significantly safer interaction with insulation. We typically recommend full retrofit when more than half of the existing fittings are halogen.

What's IC-F rating and why does it matter?

Insulation Contact, Fire-resistant. The fitting is rated to operate safely with ceiling insulation in direct contact and is fire-resistant in normal use. AS/NZS 3000 requires IC-F for any fitting where insulation contact is possible.

Why do my LED downlights keep blowing?

Most often: heat-trap installation under insulation, driver end-of-life, dimmer incompatibility, or surge damage. See Downlights keep blowing for diagnostic detail.

Can I dim LED downlights?

Yes — but the dimmer must be LED-compatible (typically marked "trailing edge" or "LED-compatible") and matched to the downlight brand. Mismatched dimmers cause flicker, buzzing, and shortened life.

What colour temperature should I choose?

3000 K (warm white) for living rooms and bedrooms; 4000 K (neutral) for kitchens, bathrooms, and laundries; 5000 K (cool) for garages, workshops, and task lighting. CCT-adjustable downlights let you switch between options.

Why Burwood Customers Choose Us

Inner West response times sit in the middle of our network — typical 30–75 minutes for emergency dispatch. Our depot is positioned to cover from Pyrmont through to Burwood with consistent fast response.