How many downlights do I need per room?

Depends on room size, ceiling height, beam angle, and use. As a rough starting point: 1 downlight per 1.5–2 m² of room area for general lighting. We design rooms individually based on what they're for.

Do you remove old fittings as part of the install?

Yes — old fittings, drivers, and any redundant cabling are removed. Plasterboard repairs (small holes) are included; larger ceiling repairs may require a plasterer.

How quickly can you install?

Standard downlight projects are typically scheduled within 5–10 business days. Larger renovation lighting plans coordinate with the build schedule. Call 0433 462 902.

Downlight Installation Earlwood

Local Downlight Installation Electrician Sydney in Earlwood

30–60 min response · Licensed Level 2 ASP · 24/7

0433 462 902 Book Online

Licensed & Insured Level 2 ASP Authorised 30–60 Min Response 24/7 Available Fixed Price Quotes

Strathfield, Burwood, and Concord post-war brick veneers face their own electrical challenges — three-phase legacy supply, oversized backyards with detached structures (granny flats, sheds, studios), and original aluminium wiring developing oxide-related hotspots.

Inner West terraces and warehouse conversions often hide old rubber or two-wire wiring above the ceiling, so before we cut a single hole for downlights we check what the existing circuit can safely carry and upgrade the wiring where the heritage fabric demands it.

About Downlight Installation Electrician Sydney

A well-lit Sydney home runs on dozens of downlights — but a poorly chosen, badly installed, or end-of-life downlight installation costs you in three ways: it burns more energy than it should, it fails sooner than it should, and in the worst case it traps heat under ceiling insulation and becomes a fire risk. Modern fixed LED downlights with integral drivers and IC-F rating are dramatically safer and longer-lasting than the legacy 12 V halogen and early LED retrofits installed across Sydney homes during the 2000s and 2010s.

Sydney Electrical Service plans, installs, and replaces downlights across every Sydney metropolitan suburb. We design lighting plans that account for room function, ceiling cavity ventilation, insulation contact ratings, and dimmer compatibility — not just “how many can fit on the ceiling.” Call 0433 462 902 for a fixed-price quote, or book online.

—

Full service details, pricing & FAQs →

Electrical work in Earlwood

Earlwood has a real inter-war character, sitting in the Canterbury-Bankstown pocket above the Cooks River. The streets are lined with solid 1920s and 30s California bungalows and Art Deco brick homes, many still owned by long-term families and largely original under the surface. Behind the charming brickwork you'll often find aged rubber and cloth-insulated wiring, original fuse boards and a single-phase supply that was never meant to run a modern household. Earlwood is part of the Ausgrid network, so any work back to the mains sits within their area.

Because so much of the stock is heritage-style, the work here calls for a careful hand: rewires that don't wreck ornate ceilings and picture rails, discreet switchboard upgrades with proper RCD protection, and added circuits for kitchen and bathroom renovations. Larger renovated bungalows frequently need an upgrade to three-phase. As a Level 2 ASP electrician we look after consumer mains, the overhead point of attachment and the metering connection so the whole supply is brought up to a safe, current standard.

Frequently Asked Questions

Should I replace all my old halogens with LEDs?

Yes — energy savings of 75–85%, longer service life, and (with IC-F rated fittings) significantly safer interaction with insulation. We typically recommend full retrofit when more than half of the existing fittings are halogen.

What's IC-F rating and why does it matter?

Insulation Contact, Fire-resistant. The fitting is rated to operate safely with ceiling insulation in direct contact and is fire-resistant in normal use. AS/NZS 3000 requires IC-F for any fitting where insulation contact is possible.

Why do my LED downlights keep blowing?

Most often: heat-trap installation under insulation, driver end-of-life, dimmer incompatibility, or surge damage. See Downlights keep blowing for diagnostic detail.

Can I dim LED downlights?

Yes — but the dimmer must be LED-compatible (typically marked "trailing edge" or "LED-compatible") and matched to the downlight brand. Mismatched dimmers cause flicker, buzzing, and shortened life.

What colour temperature should I choose?

3000 K (warm white) for living rooms and bedrooms; 4000 K (neutral) for kitchens, bathrooms, and laundries; 5000 K (cool) for garages, workshops, and task lighting. CCT-adjustable downlights let you switch between options.

Why Earlwood Customers Choose Us

Our Inner West vans carry replacement parts appropriate to the local building stock — 1990s-vintage breakers and RCDs for Federation conversions, modern RCBOs for full retrofits, and the surface-conduit hardware needed for heritage-listed installations.